Cart 0

Water Leak Alarm - Water / moisture / flood detector sensor - can also be used as safety device to prevent bath or sink overflow

The TechAffect Water Leak & Overflow Alert Alarm sounds a very loud alarm (130db) if any unwanted or unexpected water reaches its sensor i.e. bath level too high, leak, etc. The alarm will alert you in time so that you can act quickly to prevent water damage.

To operate the device, you simply place it on the wall or other suitable surface. The alarm relies on the electrical conductivity of water. If sufficient water completes an electrical circuit between the two contacts located in the probe part of the device, an audible alarm is sounded that alerts to the presence of the water. The alarm then continues until it is switched off or its batteries run down

The simplicity and ease-of-use of the Water Leak & Overflow Alert Alarm therefore makes it useful in a variety of situations. Use it in areas near appliances that have the potential to leak water, such as under sinks, by the water heater, in the basement, near dishwashers and refrigerators, under fish tanks, near plumbing and toilets etc.

If you ever have any concern that any appliance or pipework in your home might leak, you can obtain peace of mind with the Water Leak Alert.

The device can also act as an important safety device, with older people for example, to help prevent baths or sinks being filled beyond a certain level.

Features :
* Protect your home from water damage
* Place anywhere there is a danger of flood or leaks, near water heaters, sinks, dishwashers, or sump pumps etc.
* Sounds a very loud alarm when probe comes into contact with water (alarm continues for as long as battery remains active, or until probe is removed from the source of the water)

Specifications :
* Colour: may vary between Black/White
* Size: 71 x 56 x 23 mm

  • By TechAffect - If presence of water is detected, 130 decibel alarm sounds - can be heard up to 100 meters away
  • Easy to use and very small. Locate on wall or other suitable place - screws, suction cup and adhesive pad all included
  • Supplied with 0.6 meters long sensor probe for deep water detecting
  • Requires 1 x 9v battery (not supplied)

More from this collection